01314critical severityNetwork
Engine Control Module (ECM) - no communications
on 2005-2011 Audi A6 4.2L V8 · AWD
What this code means
Another module cannot communicate with the ECM over the data bus. This points to a network fault or a dead ECM.
Symptoms
- Engine no start or runs poorly
- Multiple modules report faults
- No data from engine module
Common causes
- Faulty ECM power or ground
- CAN bus wiring fault
- Blown ECM fuse
- Failed ECM
Diagnostic steps
- Check ECM fuses and power supply
- Verify ECM ground connections
- Test CAN bus wiring for shorts or opens
- Scan all modules for communication status
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance