01318high severityNetwork
Immobilizer Control Module - No Communication
on 2005 Audi A6 4.2L V8 · AWD
What this code means
No data is being received from the immobilizer module. Similar to OBD U0167 (Lost Communication with Immobilizer Module).
Symptoms
- Engine will not start
- Immobilizer warning light
- Key not recognized
Common causes
- Immobilizer module fault
- CAN or K-line wiring damage
- Power or ground fault
- Faulty key/transponder
Diagnostic steps
- Check immobilizer power and ground
- Verify communication wiring
- Scan for related faults
- Replace immobilizer module if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance