U0428low severityNetwork
Invalid Data Received from TPMS Module
on 2009 Audi A6 3.0L Supercharged V6 ยท AWD
What this code means
Data from the Tire Pressure Monitoring System is invalid or inconsistent.
Symptoms
- TPMS warning light
- Incorrect tire pressure readings
- TPMS malfunction indicator
- Pressures shown as dashes
Common causes
- TPMS sensor battery dead
- Sensor ID mismatch
- CAN bus noise
- TPMS module calibration lost
- Aftermarket wheels blocking signal
Diagnostic steps
- Check TPMS sensor signals with tool
- Relearn TPMS sensor IDs
- Check CAN bus quality
- Verify correct sensors for vehicle
- Check for wheel well interference
Repair notes
Relearn TPMS sensor IDs. Replace sensors with dead batteries.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus