U0426moderate severityNetwork
Invalid Data Received from Steering Angle Sensor
on 2011 Audi A6 3.0L Supercharged V6 ยท AWD
What this code means
Data from the steering angle sensor is invalid or out of expected range.
Symptoms
- Stability control disabled
- Power steering warning
- ESC light on
- Steering angle not centered
Common causes
- Steering angle sensor calibration lost
- Sensor failure
- CAN bus noise
- Clock spring issue
- Sensor wiring fault
Diagnostic steps
- Check steering angle sensor reading
- Perform steering angle calibration
- Test sensor output through full lock-to-lock
- Check clock spring
- Inspect sensor wiring
Repair notes
Perform steering angle sensor calibration. Common after alignment, battery disconnect, or steering work.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus