P3063high severityPowertrain
Torque Converter Clutch Capacity Low
on 2012 Audi A6 3.0L Supercharged V6 · AWD
What this code means
The torque converter clutch is not transmitting the expected amount of torque. Slip is detected beyond the normal engagement tolerance.
Symptoms
- Check Engine Light
- TCC shudder at highway speed
- Slight RPM fluctuation at cruise
- Reduced fuel economy at highway
- Torque converter area overheating
- Vibration at steady throttle
Common causes
- Worn torque converter clutch lining
- Degraded transmission fluid
- TCC apply solenoid weak
- Internal seal leak
- TCC damper spring failure
Diagnostic steps
- Monitor TCC slip PID at steady cruise
- Check transmission fluid condition
- Test TCC apply pressure
- Inspect TCC solenoid operation
- Perform stall speed test
Repair notes
Replace torque converter. Flush transmission fluid. Some vehicles respond to fluid replacement alone.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1