U1056low severityNetwork
Loss of GPS Signal
on 2012 Audi A6 3.0L Supercharged V6 · AWD
What this code means
The navigation or telematics module has lost the GPS satellite signal for position data.
Symptoms
- Navigation position lost
- GPS coordinates unavailable
- Map position incorrect or not updating
- Telematics location unknown
Common causes
- GPS antenna failure
- GPS antenna cable damaged
- Antenna connector loose
- Windshield metallic coating blocking signal
- Module GPS receiver failure
Diagnostic steps
- Check GPS antenna connection
- Test GPS antenna signal with known good antenna
- Inspect antenna cable routing
- Check for aftermarket window tint blocking GPS
- Test module GPS receiver
Repair notes
Check GPS antenna and cable connection. Metallic window tint can block GPS signal.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus