Back to 2012 Audi A6
Help

2012 AUDI A6

3.0L Supercharged V6•FWD•AUTOMATIC•gas•supercharged
8 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor1104Torque6069Fluid15DTC1810Battery2Maintenance0Recalls8
P2128critical severityPowertrain

Throttle/Pedal Position Sensor/Switch E Circuit High

on 2012 Audi A6 3.0L Supercharged V6 · FWD

What this code means

High voltage from accelerator pedal position sensor E.

Symptoms

  • Limp mode
  • Check engine light
  • Possible unintended throttle input

Common causes

  • Open ground
  • Short to voltage in harness
  • Failed sensor

Diagnostic steps

  1. Measure sensor E voltage
  2. Check ground circuit
  3. Inspect wiring

Repair notes

Replace accelerator pedal assembly or repair wiring.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Ask a Master Tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2012 Audi A6 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi A6 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →