P1410low severityPowertrain
Tank Ventilation Valve Circuit Short to Positive
on 2012 Audi A6 3.0L V6 TFSI · AWD
What this code means
The ECU detected a short to positive voltage in the EVAP tank ventilation valve (purge valve) circuit. The purge valve cannot be properly controlled, affecting evaporative emission system operation.
Symptoms
- Check Engine Light
- Fuel odor near vehicle
- Failed emissions test
Common causes
- Wiring short to battery voltage
- Faulty purge valve solenoid
- Damaged connector
- Wiring harness chafe near power source
Diagnostic steps
- Test purge valve solenoid resistance
- Inspect wiring for shorts to power
- Check connector condition
- Verify voltage at purge valve with key on engine off
Repair notes
Repair the wiring short or replace the purge valve.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1