U0108moderate severityNetwork
Lost Communication with Exhaust Gas Recirculation Module
on 2018 Audi A6 3.0L Supercharged V6 ยท AWD
What this code means
Cannot communicate with the EGR system control module.
Symptoms
- Check Engine Light
- Increased NOx emissions
- EGR-related DTCs
- Poor fuel economy
- Rough idle
Common causes
- EGR module failure
- CAN bus wiring issue
- Fuse blown
- Connector corrosion
- Carbon buildup causing module damage
Diagnostic steps
- Check EGR module fuse
- Test power and ground
- Inspect CAN wiring
- Check connector condition
- Test EGR module directly
Repair notes
Check fuses and wiring. EGR modules on diesels are prone to carbon contamination.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus