U0127high severityNetwork
Lost Communication with Parking Brake Control Module
on 2018 Audi A6 3.0L Supercharged V6 ยท AWD
What this code means
Cannot communicate with the electronic parking brake module.
Symptoms
- Parking brake warning light
- Electronic parking brake inoperative
- Brake warning message
- Cannot release parking brake
- Hill hold not working
Common causes
- EPB module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- EPB actuator failure
Diagnostic steps
- Check EPB module fuse
- Test module power and ground
- Check CAN wiring
- Try manual EPB release procedure
- Test EPB actuator motors
Repair notes
If parking brake is stuck engaged, use manual release procedure first. Check fuses.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus