P0401moderate severityPowertrain
EGR Flow Insufficient Detected
on 1998 Audi A8 3.7L V8 · AWD
What this code means
The EGR system is not flowing enough exhaust gas. This is one of the most common EGR codes.
Symptoms
- Check Engine Light
- Pinging under load
- Failed emissions (high NOx)
- Slight rough idle
Common causes
- Clogged EGR passages (most common)
- EGR valve stuck closed
- Clogged EGR tube
- Faulty DPFE/MAP sensor
- Carbon buildup in intake manifold
Diagnostic steps
- Check EGR passages for carbon restriction
- Test EGR valve by applying vacuum (should open and idle should change)
- Inspect EGR tube between exhaust and valve
- Test DPFE sensor (Ford) or EGR position sensor
- Clean carbon from intake ports
Repair notes
Clean EGR passages and valve. This is maintenance, not just a repair. Replace EGR valve if cleaning fails.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1