U0127high severityNetwork
Lost Communication with Parking Brake Control Module
on 2004-2006 Audi A8 4.2L V8 ยท AWD
What this code means
Cannot communicate with the electronic parking brake module.
Symptoms
- Parking brake warning light
- Electronic parking brake inoperative
- Brake warning message
- Cannot release parking brake
- Hill hold not working
Common causes
- EPB module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- EPB actuator failure
Diagnostic steps
- Check EPB module fuse
- Test module power and ground
- Check CAN wiring
- Try manual EPB release procedure
- Test EPB actuator motors
Repair notes
If parking brake is stuck engaged, use manual release procedure first. Check fuses.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus