P0840moderate severityPowertrain
Transmission Fluid Pressure Sensor/Switch A Circuit
on 2009 Audi A8 4.2L V8 · AWD
What this code means
The PCM detected a problem in the transmission fluid pressure sensor or switch circuit A. This can cause incorrect line pressure readings and affect shift quality.
Symptoms
- Harsh or erratic shifting
- Transmission warning light on
- Possible limp mode
Common causes
- Faulty transmission fluid pressure sensor
- Damaged wiring or connector
- Low or dirty transmission fluid
- Internal transmission pressure fault
Diagnostic steps
- Scan for codes and check freeze frame data
- Check transmission fluid level and condition
- Inspect sensor wiring and connector
- Test sensor resistance and compare to spec
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1