Back to 2011 Audi A8
Help
2011 AUDI A8
3.0L Supercharged V6•AWD•AUTOMATIC•gas•CGWA•supercharged
1 active safety recall on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor491Torque4268Fluid9DTC1115Battery1Maintenance0Recalls1
P0040moderate severityPowertrain

O2 Sensor Signals Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1

on 2011 Audi A8 3.0L Supercharged V6 · AWD

What this code means

The PCM has determined that the upstream O2 sensor signals for Bank 1 and Bank 2 are swapped, likely due to incorrect wiring after sensor replacement.

Symptoms

  • Check Engine Light
  • Poor fuel economy
  • Rough running
  • Failed emissions

Common causes

  • O2 sensor connectors swapped after service
  • Wiring crossed between banks
  • Incorrect sensor installation

Diagnostic steps

  1. Verify which O2 sensor is connected to which bank
  2. Trace wiring from each sensor to PCM connector
  3. Check for crossed connectors

Repair notes

Swap the sensor connectors to the correct banks.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2011 Audi A8 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi A8 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →