🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2017 AUDI ALLROAD

2.0L Turbo I4AWDAUTOMATICgasCYRBturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this allroad
Every control module on the 2013-2017 Audi allroad — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)3.5 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Inside transmission valve body (Tiptronic) or external on transmission case (S-tronic DSG)
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ Requires transmission fluid/filter service. Adaptation reset and clutch learning mandatory. S-tronic external module easier (1.8 hrs). Component protection active.
ABS/ESP Control Module (ABS)2.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, left front corner near headlight, mounted to hydraulic unit
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ Brake bleeding required. Module integrated with hydraulic unit. Component protection and gateway security active.
All-Wheel Drive Control Module (AWD)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Under vehicle, near center differential or transmission
🔧 ODIS (VAS 6154), VCDS limited function
⚠️ Controls Haldex or Torsen quattro. Adaptation for clutch pack wear. Some component protection on later models.
Central Convenience Control Module (CCM)1.8 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Dashboard, left side behind fuse panel or under driver footwell
🔧 ODIS (VAS 6154) with dealer authentication, limited VCDS function
⚠️ Controls windows, locks, lighting, wipers. Long coding and component protection active. Some functions accessible via VCDS.
Steering Column Control Module (SAS/J527)1.5 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Steering column, under dashboard
🔧 VCDS or ODIS
⚠️ Steering angle sensor calibration mandatory. Requires level surface, wheels straight. Less restrictive than powertrain modules.
Gateway Control Module (Gateway)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Dashboard, left side behind fuse panel or center console
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ Security gateway hub. Failure blocks all module communication. Replacement requires dealer authentication for all modules.
Adaptive Cruise Control Radar Module (ACC)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Front bumper, center behind grille
🔧 ODIS (VAS 6154) with calibration
⚠️ Radar calibration and alignment required after replacement. Optional equipment; requires dealer tool for calibration.
Radio/Navigation Control Module (MMI/RNS)1.5 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Dashboard center stack or behind glovebox
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ MMI system with component protection. Anti-theft code and dealer unlock required. Navigation SD card separate.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, behind door panel (up to 4 modules)
🔧 VCDS or ODIS
⚠️ Window and mirror calibration required. One-touch window relearn necessary.
Engine Control Module (ECM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, left side near firewall, below brake master cylinder
🔧 ODIS (VAS 6154) with dealer authentication, or Autel IM608/IM508 with AutoAuth
⚠️ Component protection and security gateway require online dealer authentication or advanced aftermarket tools. Immobilizer adaptation mandatory.
Climate Control Module (CCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard center, behind climate control panel
🔧 VCDS or ODIS
⚠️ Basic adaptation for flap calibration. HVAC system relearn after installation. Less restrictive than powertrain modules.
Airbag Control Module (ACM)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console tunnel, under center armrest or front seats
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ Crash data clearing requires dealer tool. Battery disconnect 10+ minutes. Component protection prevents aftermarket coding.
Rear View Camera Control Module (RVC)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear liftgate or integrated into MMI system
🔧 VCDS or ODIS
⚠️ Camera calibration for guidelines. Optional equipment on earlier years, standard on later models.
Fuel Pump Control Module (FPCM)1.0 hr R&Rno coding
📍 Under rear seat or in cargo area, near fuel tank
⚠️ Plug-and-play. Controls fuel pump relay and pressure regulation.
Adaptive Headlight Range Control Module (AFS)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Engine bay, behind headlight assemblies (left and right modules)
🔧 VCDS or ODIS
⚠️ Headlight aim calibration required. Xenon or LED systems; halogen uses simpler leveling.
Power Liftgate Control Module (PLG)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear liftgate, behind trim panel
🔧 VCDS or ODIS
⚠️ Liftgate height and speed calibration required. Optional equipment; not all vehicles equipped.
Adaptive Air Suspension Control Module (CDC)1.0 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Rear cargo area, left side behind trim panel
🔧 VCDS or ODIS
⚠️ Ride height calibration required. Check compressor and air lines. Less restrictive coding than powertrain.
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear cargo area or under rear seat, left side
🔧 ODIS (VAS 6154)
⚠️ Audi Connect services. SIM card and subscription activation required. Component protection on some functions.
Instrument Cluster (IC)0.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 ODIS (VAS 6154) with dealer authentication
⚠️ Mileage programming requires online dealer authentication. Component protection locks cluster to VIN. VCDS cannot program mileage.
Immobilizer Control Module (Immo)0.8 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Integrated into instrument cluster or steering column
🔧 ODIS (VAS 6154) with dealer authentication, or Autel IM608 with key programming
⚠️ Key programming requires dealer online authentication or advanced aftermarket tools. Component protection fully active.
Lane Departure Warning Control Module (LDW)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Windshield, behind rearview mirror (camera-based)
🔧 ODIS (VAS 6154) with calibration
⚠️ Camera calibration required. Windshield replacement affects calibration. Optional equipment on some models.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, left or right side behind trim
🔧 VCDS or ODIS
⚠️ Sensor calibration may be required. Check sensor wiring before replacement.
Seat Memory Control Module (Seat Memory)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under driver and/or passenger seat
🔧 VCDS or ODIS
⚠️ Memory positions lost. Recalibration and user setup required.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →