🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2020 AUDI ALLROAD

2.0L Turbo I4AWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this allroad
Every control module on the 2020-2023 Audi allroad — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)6.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission housing, integrated with mechatronic unit
🔧 VAS 6154 + ODIS
⚠️ Requires transmission removal; adaptation and clutch learning mandatory
Electric Power Steering Control Module (EPS)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, mid-column location
🔧 VAS 6154 + ODIS
⚠️ Steering angle sensor calibration required after replacement
Central Gateway Control Module (CGW)2.0 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind dashboard, left of steering column
🔧 VAS 6154 + ODIS + Security Access
⚠️ Security Gateway 17; requires online authentication for coding/replacement
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 6154 + ODIS
⚠️ Brake bleeding required after replacement; component protection
Body Control Module / Comfort Control Module (BCM)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind dashboard, left side near fuse panel
🔧 VAS 6154 + ODIS
⚠️ Controls convenience functions; key adaptation required
MMI Control Module / Infotainment (MMI)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, in MMI unit
🔧 VAS 6154 + ODIS
⚠️ Component protection; may require online activation
All-Wheel Drive Control Module / Quattro (AWD)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under vehicle, near rear differential
🔧 VCDS or Autel MaxiSys
Surround View Camera Control Module (SVC)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind MMI screen, center dashboard
🔧 VAS 6154 + ODIS
⚠️ Camera calibration required; component protection
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side firewall behind battery
🔧 VAS 6154 + ODIS
⚠️ Immobilizer pairing required; component protection active
Climate Control Module (CCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 VCDS or Autel MaxiSys
Adaptive Cruise Control Radar Module (ACC)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Front bumper, center behind grille
🔧 VAS 6154 + ODIS
⚠️ Radar calibration required; component protection
Airbag Control Module (ACM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, under front seats
🔧 VAS 6154 + ODIS
⚠️ Crash data must be cleared; component protection active
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (4 modules total)
🔧 VCDS or Autel MaxiSys
⚠️ Window initialization required after replacement
Kessy Control Module / Immobilizer (Kessy)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind dashboard, center console area
🔧 VAS 6154 + ODIS
⚠️ All keys must be reprogrammed; component protection
Adaptive Air Suspension Control Module (CDC)1.0 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Rear cargo area, left side panel
🔧 VCDS or Autel MaxiSys
⚠️ Ride height calibration required
Telematics Control Module / Audi Connect (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, center console area
🔧 VAS 6154 + ODIS
⚠️ Subscription activation required; component protection
Digital Instrument Cluster / Virtual Cockpit (IC)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind instrument panel
🔧 VAS 6154 + ODIS
⚠️ Mileage programming requires dealer authentication; component protection
Matrix LED Headlight Control Module (AFS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Each headlight assembly (left and right)
🔧 VAS 6154 + ODIS
⚠️ Headlight aim calibration required; component protection
Tailgate Control Module (TGM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear liftgate, left side
🔧 VCDS or Autel MaxiSys
⚠️ Power liftgate calibration required if equipped
Park Assist Control Module (PDC)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, right side panel
🔧 VCDS or Autel MaxiSys
Trailer Module (TM)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, right side panel
🔧 VCDS or Autel MaxiSys
⚠️ Only if factory trailer package equipped
Seat Memory Control Module (SMC)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and passenger seats
🔧 VCDS or Autel MaxiSys
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →