3.2L V6AWDAUTOMATICgas
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
hvac

Climate Control Module Torque Specs

for 2010 Audi Q5 3.2L V6 · AWD
Units
🔧Does this apply to your car? Some vehicles require actuator calibration or module configuration after replacing the climate control module. Symptoms like air blowing from wrong vents after replacement usually mean calibration was skipped, not a bad part.

5 fasteners

Seq
Component
Torque
Angle
Bracket Bolts
15 lb-ft · 20 Nm
Compressor Bolts
Critical
25 lb-ft · 34 Nm
Cover Screws
8 lb-ft · 11 Nm
Line Fittings
Critical
15 lb-ft · 20 Nm
Mounting Bolts
20 lb-ft · 27 Nm
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Audi Q5 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi Q5 — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →