3.0L TDI V6AWDAUTOMATICdieselturbo
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P3893high severityPowertrain

Diesel Particulate Filter Ash Loading High

on 2010 Audi Q7 3.0L TDI V6 · AWD

What this code means

The DPF ash accumulation (non-combustible residue from oil) has reached a level requiring cleaning or replacement. Ash cannot be removed by regeneration.

Symptoms

  • DPF warning light
  • Reduced engine performance
  • Increased exhaust backpressure
  • Regeneration less effective
  • Fuel economy declining
  • DPF replacement or cleaning message

Common causes

  • Normal ash accumulation over mileage
  • Excessive oil consumption increasing ash
  • Wrong oil specification (high ash)
  • Extended DPF service interval
  • Frequent regeneration depositing more ash

Diagnostic steps

  1. Measure DPF differential pressure at idle
  2. Compare to ash loading model in ECM
  3. Check engine oil consumption rate
  4. Verify oil specification (low SAPS)
  5. Review DPF mileage and service history

Repair notes

DPF professional cleaning (baking/pneumatic) or replacement. Use low-SAPS oil per manufacturer specification to minimize future ash buildup. Address any oil consumption issues.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Audi Q7 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi Q7 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →