Back to 2010 Audi Q7
Help
2010 AUDI Q7
4.2L V8•AWD•AUTOMATIC•gas
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor547Torque2321Fluid9DTC894Battery1Maintenance0Recalls3
P1602high severityPowertrain

Power Supply Voltage Too Low

on 2010 Audi Q7 4.2L V8 · AWD

What this code means

The ECU detected that its supply voltage has dropped below the minimum operating threshold. Low voltage can cause erratic ECU behavior, false fault codes, and poor engine performance.

Symptoms

  • Check Engine Light
  • Multiple fault codes stored
  • Engine running rough
  • Starting difficulties
  • Electrical accessories dimming

Common causes

  • Weak or failing battery
  • Faulty alternator or voltage regulator
  • Corroded battery terminals
  • High-resistance connection in power supply
  • Parasitic drain depleting battery

Diagnostic steps

  1. Test battery voltage and load test
  2. Test alternator output voltage and current
  3. Inspect battery terminals and connections
  4. Check main power supply wiring to ECU
  5. Test for parasitic electrical drain

Repair notes

Replace the battery or alternator; clean and tighten all power supply connections.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2010 Audi Q7 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi Q7 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →