P0550low severityPowertrain
Power Steering Pressure Sensor Circuit Malfunction
on 2014 Audi Q7 3.0L Supercharged V6 · AWD
What this code means
The PCM detected a fault in the power steering pressure sensor circuit. This sensor tells the engine to adjust idle when steering load increases.
Symptoms
- Rough or stalling idle when turning
- Check engine light on
- Erratic idle speed
Common causes
- Faulty power steering pressure sensor
- Damaged sensor wiring or connector
- Low power steering fluid
- Failed PCM input circuit
Diagnostic steps
- Read sensor data with scan tool
- Inspect wiring and connector
- Check power steering fluid level
- Test sensor signal at various steering loads
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1