U0146high severityNetwork
Lost Communication with Gateway Module A
on 2015 Audi Q7 3.0L Supercharged V6 (TFSI, 280 hp) ยท AWD
What this code means
Cannot communicate with the central gateway module that routes data between vehicle networks.
Symptoms
- Multiple systems affected
- Scan tool partial communication
- Cross-network features not working
- Intermittent multi-system faults
Common causes
- Gateway module failure
- CAN bus wiring issue
- Module power loss
- Fuse blown
- Software corruption
Diagnostic steps
- Check gateway module fuse
- Test power and ground
- Check CAN wiring on all bus connections
- Try gateway module reprogramming
- Test individual bus segments
Repair notes
Gateway module connects multiple CAN buses. Failure affects cross-bus communication. Common on German vehicles.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus