U0156high severityNetwork
Lost Communication with Electronic Shift Module
on 2015 Audi Q7 3.0L Supercharged V6 (TFSI, 280 hp) ยท AWD
What this code means
Cannot communicate with the electronic range select or column/console shifter module.
Symptoms
- Cannot shift out of park
- Shift indicator incorrect
- Gear selection not recognized
- Transmission defaults to limp mode
Common causes
- Shift module failure
- Wiring issue
- Module power loss
- Fuse blown
- Shifter mechanism jam
Diagnostic steps
- Check shift module fuse
- Test power and ground
- Check wiring to shifter
- Test shift position sensor
- Check for mechanical shifter issues
Repair notes
Check brake-shift interlock solenoid and fuses. Override button usually on shifter for emergency.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus