U0422moderate severityNetwork
Invalid Data Received from Body Control Module
on 2015 Audi Q7 3.0L Supercharged V6 (TFSI, 280 hp) ยท AWD
What this code means
The data from the BCM is invalid, causing other modules to misinterpret body system states.
Symptoms
- Multiple body electronic glitches
- Lights behaving erratically
- Lock/unlock inconsistent
- Warning messages incorrect
Common causes
- BCM software corruption
- CAN bus noise
- BCM partial failure
- Water damage to BCM
- Bad BCM ground
Diagnostic steps
- Check BCM for stored codes
- Update BCM software
- Test CAN bus signal quality
- Inspect BCM for water damage
- Check BCM ground connections
Repair notes
Reprogram BCM. Check for water intrusion at BCM location. Inspect ground connections.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus