U0064high severityNetwork
Lost Communication with Diagnostic Gateway Module
on 2008-2015 Audi R8 4.2L V8 ยท AWD
What this code means
Cannot communicate with the diagnostic gateway that routes scan tool communication to vehicle buses.
Symptoms
- Scan tool cannot connect
- OBD port no communication
- Cannot read any DTCs
- Cannot perform diagnostics
Common causes
- Gateway module power failure
- Gateway module failure
- CAN bus issue to gateway
- OBD port wiring damage
- Fuse blown
Diagnostic steps
- Check gateway module fuse
- Test power and ground at gateway
- Check OBD port pin connections
- Test CAN wiring from OBD port to gateway
- Verify gateway module operation
Repair notes
Check OBD port wiring and gateway module power supply. Common on VW/Audi vehicles.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus