Back to 2008 Audi R8
Help
2008 AUDI R8
4.2L V8•AWD•DCT•gas•BYH
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor492Torque3128Fluid9DTC1087Battery1Maintenance0Recalls0
P1296moderate severityPowertrain

Cooling System Malfunction

on 2008 Audi R8 4.2L V8 · AWD

What this code means

The ECU detected that the engine cooling system is not operating within expected parameters. The coolant temperature is not reaching or maintaining the expected operating range within the allotted time.

Symptoms

  • Check Engine Light
  • Engine running cold
  • Poor heater output
  • Reduced fuel economy
  • Higher emissions

Common causes

  • Thermostat stuck open
  • Coolant temperature sensor fault
  • Low coolant level
  • Cooling fan running constantly
  • Coolant leak causing slow warm-up

Diagnostic steps

  1. Check coolant level and condition
  2. Monitor coolant temperature rise during warm-up with scan tool
  3. Test thermostat operation
  4. Test coolant temperature sensor
  5. Check for coolant leaks

Repair notes

Replace the thermostat if the engine is not reaching operating temperature.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2008 Audi R8 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi R8 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →