P0615moderate severityPowertrain
Starter Motor Relay Circuit
on 2009 Audi R8 5.2L V10 (Gen 1, 525hp) · AWD
What this code means
Malfunction in the starter motor relay circuit.
Symptoms
- No start - no crank
- Starter relay clicking
- Intermittent no-start
Common causes
- Faulty starter relay
- Wiring issue
- Ignition switch problem
- Neutral safety switch issue
- PCM starter control failure
Diagnostic steps
- Test starter relay
- Check wiring to relay
- Test ignition switch
- Test neutral safety switch
- Check PCM starter output
Repair notes
Replace starter relay. Check ignition switch and neutral safety switch.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1