U1088low severityNetwork
Loss of Communication with Key Fob
on 2010 Audi R8 5.2L V10 (Gen 1, 525hp) ยท AWD
What this code means
The vehicle cannot communicate with the key fob for keyless entry or push-button start.
Symptoms
- Keyless entry not working
- Push-button start not detecting key
- Key fob not recognized
- Place key in backup location message
Common causes
- Key fob battery dead
- Key fob internal failure
- Vehicle receiver failure
- Fuse blown
- Antenna module failure
- RF interference
Diagnostic steps
- Replace key fob battery
- Test with spare key fob
- Check keyless entry receiver fuse
- Test key fob signal with diagnostic tool
- Check for RF interference sources
Repair notes
Replace key fob battery first. Test with second key. If both keys fail, check vehicle receiver module.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus