U0064high severityNetwork
Lost Communication with Diagnostic Gateway Module
on 2015 Audi R8 5.2L V10 ยท AWD
What this code means
Cannot communicate with the diagnostic gateway that routes scan tool communication to vehicle buses.
Symptoms
- Scan tool cannot connect
- OBD port no communication
- Cannot read any DTCs
- Cannot perform diagnostics
Common causes
- Gateway module power failure
- Gateway module failure
- CAN bus issue to gateway
- OBD port wiring damage
- Fuse blown
Diagnostic steps
- Check gateway module fuse
- Test power and ground at gateway
- Check OBD port pin connections
- Test CAN wiring from OBD port to gateway
- Verify gateway module operation
Repair notes
Check OBD port wiring and gateway module power supply. Common on VW/Audi vehicles.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus