U0128critical severityNetwork
Lost Communication with Brake Boost Control Module
on 2015 Audi R8 5.2L V10 · AWD
What this code means
Cannot communicate with the power brake booster control module on vehicles with electric brake boost.
Symptoms
- Brake pedal feels hard
- Brake boost warning light
- Increased stopping distance
- Brake assist not available
Common causes
- Electric brake booster module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Brake booster motor failure
Diagnostic steps
- Check brake booster module fuse
- Test module power and ground
- Check CAN wiring
- Test brake booster motor
- Check brake fluid level
Repair notes
Safety critical. Brakes still function but with no power assist. Check fuses and power supply.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus