U0104moderate severityNetwork
Lost Communication with Cruise Control Module
on 2015 Audi R8 5.2L V10 (Gen 1, 525hp) ยท AWD
What this code means
Cannot communicate with the cruise control module.
Symptoms
- Cruise control inoperative
- Cruise light not illuminating
- Adaptive cruise not available
- Speed not maintained
Common causes
- Cruise control module failure
- CAN bus wiring issue
- Clockspring failure
- Fuse blown
- Steering wheel button failure
Diagnostic steps
- Check cruise control fuse
- Test module power and ground
- Check clockspring continuity
- Inspect steering wheel button connections
- Check CAN wiring to module
Repair notes
Check clockspring (common failure) and fuses. Test steering wheel controls.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus