Back to 2020 Audi R8
Help
2020 AUDI R8
5.2L V10 (Gen 2, 562hp)•AWD•DCT•gas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor479Torque2135Fluid10DTC1145Battery1Maintenance0Recalls0
P3068moderate severityPowertrain

Automatic Transmission Fluid Deterioration Detected

on 2020 Audi R8 5.2L V10 (Gen 2, 562hp) · AWD

What this code means

The transmission fluid condition sensor or monitoring algorithm has determined the ATF has deteriorated beyond serviceable limits.

Symptoms

  • Check Engine Light or service reminder
  • Shift quality degradation
  • Transmission temperature running higher
  • Dark or burnt-smelling fluid
  • TCC shudder may develop
  • Increased shift time

Common causes

  • Extended fluid service interval exceeded
  • Overheating episodes degrading fluid
  • Contamination from internal wear
  • Wrong fluid type previously used
  • Fluid oxidation from age

Diagnostic steps

  1. Check ATF color, smell, and clarity
  2. Read fluid condition sensor data
  3. Monitor transmission temperatures
  4. Test fluid viscosity if possible
  5. Review fluid service history

Repair notes

Perform transmission fluid and filter service immediately. If fluid is severely burnt, multiple fluid exchanges may be needed. Use only manufacturer-specified ATF.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2020 Audi R8 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi R8 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →