U0135low severityNetwork
Lost Communication with TPMS Control Module
on 2020 Audi R8 5.2L V10 (Gen 2, 562hp) ยท AWD
What this code means
Cannot communicate with the Tire Pressure Monitoring System module.
Symptoms
- TPMS warning light on
- Tire pressure not displayed
- TPMS malfunction indicator
- Cannot reprogram tire sensors
Common causes
- TPMS module failure
- CAN bus wiring issue
- Module power loss
- Fuse blown
- TPMS antenna issue
Diagnostic steps
- Check TPMS module fuse
- Test module power and ground
- Check CAN wiring
- Test TPMS antenna
- Verify TPMS sensors are transmitting
Repair notes
Check fuses. TPMS module may be integrated into BCM on some vehicles.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus