U0144moderate severityNetwork
Lost Communication with A/C Compressor Control Module
on 2020 Audi R8 5.2L V10 (Gen 2, 562hp) · AWD
What this code means
Cannot communicate with the air conditioning compressor clutch control module.
Symptoms
- A/C not engaging
- A/C compressor not running
- Climate control warning
- No cold air from vents
Common causes
- A/C compressor module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Compressor clutch failure
Diagnostic steps
- Check A/C compressor fuse
- Test module power and ground
- Check CAN wiring
- Test compressor clutch directly
- Check refrigerant pressure
Repair notes
Check refrigerant charge first, then fuses. Low refrigerant prevents compressor engagement.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus