U0148low severityNetwork
Lost Communication with Seat Control Module B
on 2020 Audi R8 5.2L V10 (Gen 2, 562hp) · AWD
What this code means
Cannot communicate with the passenger seat control module.
Symptoms
- Passenger power seat inoperative
- Passenger seat memory not working
- Passenger seat heater not controlled
Common causes
- Seat module failure
- Wiring issue under seat
- Power loss to module
- Fuse blown
Diagnostic steps
- Check seat module fuse
- Test power and ground
- Inspect wiring
- Check connector under seat
Repair notes
Check connector under passenger seat. Same diagnosis approach as driver seat module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus