🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2010 AUDI RS5

4.2L V8AWDAUTOMATICgasCFSA
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this RS5
Every control module on the 2010-2012 Audi RS5 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM / Mechatronic)6.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission oil pan (mechatronic unit), accessed from underneath
🔧 VAS 5052 or ODIS
⚠️ 7-speed S tronic (DL501). Requires transmission fluid drain, pan removal. Adaptation and clutch learning mandatory. High failure rate on early units.
Radio/Navigation Control Module (RNS-E / MMI 3G)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, in MMI unit
🔧 VAS 5052 or ODIS
⚠️ MMI 3G system. Component protection and VIN lock. Requires dealer coding for full integration with vehicle systems.
Climate Control Module (CCM)2.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 VCDS, Autel, Launch
⚠️ Automatic climate control. Basic adaptation for flap calibration required after replacement.
ABS/ESP Control Module (ABS/ESP)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 5052 or ODIS, VCDS for basic functions
⚠️ Integrated hydraulic unit. Brake bleeding required after replacement. Steering angle sensor calibration mandatory.
Central Convenience Control Module (CCM / Comfort Module)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, left side near fuse panel or under driver seat
🔧 VAS 5052 or ODIS, VCDS for some functions
⚠️ Controls central locking, windows, lighting. Component protection may apply.
Gateway Control Module (Gateway)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, left side near fuse panel or center console area
🔧 VAS 5052 or ODIS
⚠️ CAN gateway. Manages communication between bus systems. Component protection applies.
All-Wheel Drive Control Module (Quattro / AWD Module)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Under vehicle, near center differential or transmission
🔧 VAS 5052 or ODIS
⚠️ Controls torque vectoring and center differential. Adaptation required for proper quattro operation.
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall, under plastic cover
🔧 VAS 5052 or ODIS, VCDS (Ross-Tech) for most functions
⚠️ 4.2L FSI V8 specific. Immobilizer adaptation requires dealer or EEPROM work. Component protection may prevent used module swap without adaptation.
Immobilizer/Keyless Access Control Module (Immo / Kessy)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind dashboard, center or integrated with steering column electronics
🔧 VAS 5052 or ODIS
⚠️ Keyless Go system. Key programming and immobilizer adaptation dealer-only. Component protection prevents used module swap.
Instrument Cluster (IC)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5052 or ODIS
⚠️ Mileage programming requires dealer access. Component protection prevents used cluster swap without adaptation. VCDS can code but not program mileage.
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside each door (up to 4 modules)
🔧 VCDS, Autel
⚠️ Controls windows, mirrors, locks per door. Basic adaptation for window calibration.
Steering Column Electronics / Steering Angle Sensor (SAS / J527)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Steering column, under dashboard
🔧 VCDS, Autel, Launch
⚠️ Steering angle calibration required after replacement or alignment. Basic relearn procedure available with most tools.
Adaptive Headlight Control Module (AFS / Bi-Xenon)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Each headlight assembly (left and right modules)
🔧 VCDS, Autel
⚠️ Adaptive bi-xenon headlights. Leveling calibration required. Two modules (one per headlight).
Dynamic Ride Control Module (DRC)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk area, left or right side behind trim
🔧 VAS 5052 or ODIS, VCDS for basic functions
⚠️ Sport differential and adaptive damping control. Calibration required after replacement.
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard or in trunk area
🔧 VAS 5052 or ODIS
⚠️ Audi Connect services. Requires dealer activation and subscription setup.
Airbag Control Module (ACM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Center console, under front seats or behind center trim
🔧 VAS 5052 or ODIS, VCDS
⚠️ Crash data must be cleared. Component protection may apply to used modules.
Fuel Pump Control Module (FPCM)0.8 hr R&Rno coding
📍 Under rear seat or in trunk area, near fuel tank
⚠️ Controls fuel pump operation. Typically plug-and-play.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear left or right quarter panel, behind trim
🔧 VCDS, Autel
⚠️ Controls parking sensors. Basic coding for sensor configuration.
Seat Memory Control Module (Seat Module)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under front seats (driver and passenger)
🔧 VCDS, Autel
⚠️ Controls power seat adjustment and memory. Two modules if both seats have memory.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →