U2001moderate severityNetwork
Module Configuration Incompatible
on 2013 Audi RS5 4.2L V8 · AWD
What this code means
The installed module configuration is incompatible with the vehicle network or other modules.
Symptoms
- Module not functioning after replacement
- Communication errors with new module
- Features not available
- System in degraded mode
Common causes
- Wrong replacement module installed
- Module from different market/region
- Module not programmed for vehicle
- Software version incompatible
- Hardware revision mismatch
Diagnostic steps
- Verify module part number
- Check software version compatibility
- Compare module to original specifications
- Program module with correct calibration
- Verify correct module for market/region
Repair notes
Verify correct module is installed. Program with correct calibration for this specific vehicle.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus