4.2L V8โ€ขAWDโ€ขAUTOMATICโ€ขgasโ€ขBBK
1 active safety recall on this vehicle โ€” view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor โ€” $99 โ†’
P2419low severityPowertrain

EVAP Switching Valve Control Circuit Low

on 2004 Audi S4 4.2L V8 ยท AWD

What this code means

Low signal on the EVAP system switching valve circuit.

Symptoms

  • Check engine light
  • EVAP test failure

Common causes

  • Valve circuit short to ground
  • Failed valve solenoid
  • Wiring damage

Diagnostic steps

  1. Check valve connector
  2. Measure solenoid resistance
  3. Check wiring

Repair notes

Replace valve or repair wiring.

Other Powertrain codes on this vehicle

๐Ÿ”ง Database maintained under the daily editorial review of Chris Hackleman ยท Master Technician ยท 20+ years and Jeff Moore ยท Master Mechanic ยท 20+ years. Spot an error? Use the Help link above โ€” a human reads every report.
Stuck on this repair? Take it to The Diag Desk โ€” ask a master tech about this exact car โ†’ real human answer within 24h, never AI
โš  STILL BEHIND THE PAYWALL
The 2004 Audi S4 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy โ€” and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi S4 โ€” $99 โ†’
Building an app?
Free API access to all this data โ€” 10 requests/day, no card required.
Get an API key โ†’
Run a shop?
Manage repairs, estimates, and customers with ShopBase โ€” $249/mo, all features included.
Try ShopBase โ†’