U0418moderate severityNetwork
Invalid Data Received from Parking Brake Control Module
on 2004 Audi S4 4.2L V8 ยท AWD
What this code means
Data from the electronic parking brake module is invalid or out of range.
Symptoms
- Parking brake warning light
- EPB status unknown
- Hill hold not working
- Service parking brake message
Common causes
- EPB module calibration lost
- CAN bus noise
- Module partial failure
- EPB sensor fault
Diagnostic steps
- Check EPB module for codes
- Test EPB actuator position sensors
- Check CAN bus signal quality
- Recalibrate EPB module
Repair notes
Recalibrate electronic parking brake. Check actuator position sensors.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus