🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2009 AUDI S4

3.0L Supercharged V6AWDAUTOMATICgasCAKAsupercharged
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S4
Every control module on the 2008-2012 Audi S4 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)4.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission housing (Mechatronic unit for S tronic/DSG)
🔧 VAS 5052 or ODIS
⚠️ Mechatronic unit replacement requires transmission oil change, adaptation, and clutch learning. Component protection active.
Radio/Navigation Control Module (RNS-E / MMI 2G)1.8 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Dashboard center stack or behind glove box (MMI brain)
🔧 VCDS or Autel
⚠️ MMI 2G systems have separate control unit behind glove box. Radio code may be required after battery disconnect.
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 5052 or ODIS, VCDS for basic functions
⚠️ Brake bleeding required after replacement. Component protection on 2009+ models.
Central Convenience Control Module (CCM / Comfort Module)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, left side behind fuse panel or under driver footwell
🔧 VAS 5052 or ODIS, VCDS for some functions
⚠️ Controls windows, locks, lighting. Component protection on 2009+ models. Long coding required.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard center, behind climate control panel
🔧 VCDS or Autel
⚠️ Basic adaptation for flap calibration. No component protection typically.
All-Wheel Drive Control Module (Quattro / AWD)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear differential area or transmission tunnel
🔧 VAS 5052 or ODIS, VCDS for basic functions
⚠️ Controls torque distribution. Component protection may apply on 2009+ models.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (up to 4 modules)
🔧 VCDS or Autel
⚠️ Controls windows, mirrors, locks per door. Basic adaptation for window auto-up/down.
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall under plastic cover
🔧 VAS 5052 or ODIS, VCDS (Ross-Tech) for most functions
⚠️ Immobilizer adaptation requires dealer-level access or EEPROM work. Component protection introduced 2009+.
Steering Column Electronics / Steering Angle Sensor (SAS / J527)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Steering column, under lower dash trim
🔧 VCDS or Autel
⚠️ Steering angle sensor calibration required after replacement or alignment. No component protection.
Gateway Control Module (Gateway)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, left side behind fuse panel or center console area
🔧 VAS 5052 or ODIS
⚠️ Central CAN hub. Replacement requires VIN coding and may require other modules to be re-adapted.
Airbag Control Module (ACM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, under center armrest or front seats
🔧 VAS 5052 or ODIS
⚠️ Crash data must be cleared. Component protection prevents used module swap without dealer intervention.
Adaptive Headlight Range Control Module (AFS / Bi-Xenon)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Each headlight assembly (left and right modules)
🔧 VCDS or Autel
⚠️ Headlight aim calibration required. Separate module per headlight on Bi-Xenon/AFS equipped models.
Immobilizer/Keyless Access Control Module (Immo / Kessy)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, integrated with steering column electronics or separate module near ignition
🔧 VAS 5052 or ODIS
⚠️ Key programming and immobilizer adaptation dealer-only. Component protection active.
Adaptive Damping Control Module (CDC / Damper Control)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left side or under rear seat
🔧 VCDS or Autel
⚠️ Only on models with adaptive/sport suspension. Basic adaptation required.
Telephone/Telematics Control Module (Phone / Bluetooth)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left or right side, or behind glove box
🔧 VCDS or Autel
⚠️ Optional equipment. Pairing required after replacement.
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5052 or ODIS
⚠️ Mileage programming requires dealer access due to component protection. VIN and immobilizer data must match.
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under rear seat or in trunk area near fuel tank
🔧 VCDS or Autel
⚠️ Basic adaptation only. Not present on all model years; some integrate into ECM.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear bumper area, left or right side behind trim
🔧 VCDS or Autel
⚠️ Sensor calibration may be needed. No component protection.
Seat Memory Control Module (Seat Memory)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and/or passenger seat
🔧 VCDS or Autel
⚠️ Separate modules for driver and passenger if equipped. Basic adaptation only.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →