🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.
Back to search

2017 AUDI S4

3.0L Turbo V6•AWD•AUTOMATIC•gas•CWGD•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S4 →
Every control module on the 2013-2017 Audi S4 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)4.5 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Inside transmission housing (Mechatronic unit for S tronic/DSG)
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Mechatronic unit replacement requires transmission oil change, adaptation, clutch learning. Security gateway and component protection active.
Radio/Navigation Control Module (MMI 3G / 3G+)2.0 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Behind glove box (MMI brain) or dashboard center
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ MMI 3G/3G+ systems. Component protection active. Radio code may be required.
ABS/ESP Control Module (ABS)1.5 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Brake bleeding required. Security gateway active. Component protection prevents used module swap.
Central Convenience Control Module (CCM / Comfort Module)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, left side behind fuse panel or under driver footwell
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Controls windows, locks, lighting. Security gateway and component protection active. Long coding required.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard center, behind climate control panel
🔧 VCDS or Autel
⚠️ Basic adaptation for flap calibration. No component protection typically.
Driver Assistance Control Module (ACC / Lane Assist)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Behind front grille or windshield area (radar/camera)
🔧 ODIS with dealer access
⚠️ Optional equipment. Adaptive cruise control and lane assist. Calibration required after replacement. Security gateway active.
All-Wheel Drive Control Module (Quattro / AWD)1.5 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Rear differential area or transmission tunnel
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Controls torque distribution. Security gateway and component protection active.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (up to 4 modules)
🔧 VCDS or Autel
⚠️ Controls windows, mirrors, locks per door. Basic adaptation for window auto-up/down.
Engine Control Module (ECM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, left side near firewall under plastic cover
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Security gateway active. Component protection requires dealer authentication or advanced aftermarket tools with OEM gateway bypass.
Steering Column Electronics / Steering Angle Sensor (SAS / J527)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Steering column, under lower dash trim
🔧 VCDS or Autel
⚠️ Steering angle sensor calibration required. No component protection typically.
Gateway Control Module (Gateway)1.2 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Dashboard, left side behind fuse panel or center console area
🔧 ODIS with dealer access
⚠️ Security gateway hub. Replacement requires dealer-level VIN coding and re-adaptation of all modules.
Airbag Control Module (ACM)1.0 hr R&Rsecurity gateway +0.6 hr▸ programming details
📍 Center console tunnel, under center armrest or front seats
🔧 ODIS with dealer access or Autel with AutoAuth
⚠️ Crash data clearing and component protection require security gateway authentication.
Adaptive Headlight Range Control Module (AFS / Bi-Xenon / LED)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Each headlight assembly (left and right modules)
🔧 VCDS or Autel
⚠️ Headlight aim calibration required. Separate module per headlight. LED headlights available 2013+.
Immobilizer/Keyless Access Control Module (Immo / Kessy)1.0 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Dashboard, integrated with steering column electronics or separate module
🔧 ODIS with dealer access
⚠️ Key programming strictly dealer-only. Security gateway and component protection active.
Adaptive Damping Control Module (CDC / Damper Control)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left side or under rear seat
🔧 VCDS or Autel
⚠️ Only on models with adaptive/sport suspension. Basic adaptation required.
Telephone/Telematics Control Module (Phone / Bluetooth)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left or right side, or behind glove box
🔧 VCDS or Autel
⚠️ Optional equipment. Pairing required after replacement.
Rear View Camera Control Module (RVC)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk lid or rear bumper area
🔧 VCDS or Autel
⚠️ Optional equipment on 2013+. Camera calibration may be needed.
Instrument Cluster (IC)0.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 ODIS with dealer access
⚠️ Mileage programming strictly dealer-only due to security gateway and component protection. VIN and immobilizer data must match.
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under rear seat or in trunk area near fuel tank
🔧 VCDS or Autel
⚠️ Basic adaptation only. Not present on all model years; some integrate into ECM.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear bumper area, left or right side behind trim
🔧 VCDS or Autel
⚠️ Sensor calibration may be needed. No component protection.
Seat Memory Control Module (Seat Memory)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and/or passenger seat
🔧 VCDS or Autel
⚠️ Separate modules for driver and passenger if equipped. Basic adaptation only.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →