U0129critical severityNetwork
Lost Communication with Brake System Control Module
on 2007 Audi S6 5.2L V10 ยท AWD
What this code means
Cannot communicate with the general brake system control module.
Symptoms
- Brake warning light on
- ABS disabled
- Stability control off
- Brake system message displayed
Common causes
- Brake module failure
- CAN bus wiring damage
- Module power loss
- Fuse blown
- Water damage
Diagnostic steps
- Check brake system fuses
- Test module power and ground
- Check CAN wiring
- Inspect module for water damage
- Try direct module communication
Repair notes
Check fuses and power supply. Inspect for water damage near brake module location.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus