B2200low severityBody
Front Parking Sensor Circuit
on 2010 Audi S6 5.2L V10 · AWD
What this code means
Malfunction in the front parking/proximity sensor system. One or more front ultrasonic sensors are not functioning.
Symptoms
- Front parking sensors not beeping
- Constant beeping with no obstacle
- Parking sensor warning on display
- One sensor position not working
Common causes
- Faulty ultrasonic sensor
- Sensor covered by dirt, ice, or paint
- Wiring damage
- Parking assist module failure
- Sensor knocked out of alignment
Diagnostic steps
- Clean all front sensors
- Test each sensor individually with scan tool
- Inspect sensor wiring
- Check parking assist module
- Listen for sensor clicking (normal operation sound)
Repair notes
Replace faulty ultrasonic sensor. Clean sensors. Ensure sensors are properly seated in bumper.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open