Back to 2010 Audi S6
Help
2010 AUDI S6
5.2L V10•AWD•AUTOMATIC•gas
2 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor551Torque4564Fluid6DTC894Battery1Maintenance0Recalls2
P0300critical severityPowertrain

Random/Multiple Cylinder Misfire Detected

on 2010 Audi S6 5.2L V10 · AWD

What this code means

The PCM has detected misfires occurring in multiple cylinders randomly. This is different from a single-cylinder misfire and often points to a system-wide issue.

Symptoms

  • Check Engine Light (flashing if severe)
  • Rough idle
  • Vibration
  • Loss of power
  • Hesitation
  • Poor fuel economy
  • Possible catalyst damage

Common causes

  • Vacuum leak
  • Low fuel pressure
  • Faulty spark plugs (all)
  • Ignition coil pack failure
  • EGR valve stuck open
  • Low compression (multiple cylinders)
  • Wiring harness issue
  • MAF sensor problem

Diagnostic steps

  1. Check for vacuum leaks (smoke test)
  2. Test fuel pressure
  3. Inspect spark plugs
  4. Test ignition coils
  5. Check fuel injectors
  6. Test compression
  7. Check MAF sensor
  8. Monitor fuel trim values

Repair notes

Start with spark plugs and vacuum leaks. Flashing CEL means severe misfire - stop driving to protect catalytic converter.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2010 Audi S6 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Audi S6 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →