🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.
Back to search

2015 AUDI TT RS

2.5L Turbo I5•AWD•DCT•gas•CEPA•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this TT RS →
Every control module on the 2012-2018 Audi TT RS — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)4.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission housing (Mechatronic unit for S tronic)
🔧 VAS 5051/5052 or ODIS
⚠️ Mechatronic replacement requires transmission removal; adaptation and clutch learning mandatory
Electric Power Steering Control Module (EPS)1.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, mid-column or lower dash area
🔧 VAS 5051/5052 or ODIS
⚠️ Steering angle sensor calibration required; component protection from 2015+
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 5051/5052 or ODIS
⚠️ Brake bleeding required after replacement; steering angle sensor calibration needed
Central Convenience Control Module (CCM / BCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind dashboard, left side near fuse panel or under driver seat
🔧 VAS 5051/5052 or ODIS
⚠️ Controls windows, locks, lighting; component protection from 2015+
Gateway Control Module (Gateway)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, left of steering column or center console area
🔧 VAS 5051/5052 or ODIS
⚠️ Security gateway active from 2015+ (component protection); online authentication required for many modules post-replacement
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 VCDS or Autel
⚠️ Basic settings adaptation for flap calibration
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall, below intake manifold
🔧 VAS 5051/5052 or ODIS
⚠️ Immobilizer pairing required; component protection active from 2015+
Radio/Navigation Control Module (RNS-E / MMI)1.2 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Behind center dashboard, in radio slot
🔧 VCDS or Autel
⚠️ Anti-theft code may be required; Bose amplifier separate module
All-Wheel Drive Control Module (Quattro / Haldex)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear differential area or under vehicle near rear axle
🔧 VCDS or Autel
⚠️ Haldex Gen 4/5; basic settings for clutch adaptation
Instrument Cluster (IC)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5051/5052 or ODIS
⚠️ Mileage programming required; component protection prevents aftermarket coding from 2015+
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (driver and passenger)
🔧 VCDS or Autel
⚠️ Controls mirrors, windows, locks per door; may require window initialization
Immobilizer/Keyless Access Control Module (Immo / Kessy)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind dashboard, center or integrated in steering column
🔧 VAS 5051/5052 or ODIS
⚠️ Key programming and ECM pairing mandatory; dealer-only from all years
Airbag Control Module (ACM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, under front seats or behind center trim
🔧 VAS 5051/5052 or ODIS
⚠️ Crash data must be cleared; component protection from 2015+
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under rear seat or in trunk, near fuel tank
🔧 VCDS or Autel
⚠️ May be integrated with fuel level sender; basic settings for pump adaptation
Sound System Amplifier (Amp)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under driver or passenger seat, or in trunk
🔧 VCDS or Autel
⚠️ Bose premium audio option; basic settings for speaker configuration
Magnetic Ride Control Module (MRC / DCC)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, left or right side panel
🔧 VCDS or Autel
⚠️ Optional equipment; basic settings for damper calibration
Park Distance Control Module (PDC)0.7 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear bumper area, behind trim or in trunk left side
🔧 VCDS or Autel
⚠️ Sensor calibration may be needed
Seat Memory Control Module (Seat Memory)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and/or passenger seat
🔧 VCDS or Autel
⚠️ Optional equipment; basic settings for memory positions
Adaptive Headlight Control Module (AFS)0.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Each headlight assembly (left and right modules)
🔧 VCDS or Autel
⚠️ Xenon/LED headlights only; basic settings for leveling and range
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →