P2104critical severityPowertrain
Throttle Actuator Control System Forced Idle
on 2009 Audi TT 3.2L V6 · AWD
What this code means
ECM has forced the engine to idle speed only due to a detected throttle control fault.
Symptoms
- Engine stuck at idle
- Check engine light
- Vehicle barely moves
- Traction control light on
Common causes
- Throttle body failure
- APP sensor fault
- Wiring issue
- ECM detected conflicting throttle signals
Diagnostic steps
- Scan for other DTCs
- Check APP sensor signals
- Inspect throttle body
- Clear codes and test
Repair notes
Diagnose root cause from accompanying DTCs. This is a protective measure.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16395
Camshaft Position Actuator Circuit/Open Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1