2.8L I6 M52RWDAUTOMATICgas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
2A2Chigh severityPowertrain

Camshaft to Crankshaft Correlation Implausible

on 1999 BMW 328is E36 2.8L I6 M52 · RWD

What this code means

The camshaft position does not correlate correctly with the crankshaft position, indicating a timing mismatch. The ECU detects the valve timing is out of the expected range.

Symptoms

  • Rough running
  • Loss of power
  • Check engine light

Common causes

  • Stretched or worn timing chain
  • Faulty VANOS unit
  • Camshaft position sensor fault
  • Slipped timing components

Diagnostic steps

  1. Read camshaft/crankshaft correlation data
  2. Inspect timing chain for stretch
  3. Test VANOS solenoid operation
  4. Verify camshaft timing marks
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1999 BMW 328is E36 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW 328is E36 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →