U0115critical severityNetwork
Lost Communication with ECM/PCM B
on 2005 BMW 330i 3.0L I6 M54 · RWD
What this code means
Cannot communicate with the secondary Engine Control Module on vehicles with dual ECMs.
Symptoms
- Partial engine management failure
- Some cylinders not controlled
- Reduced power
- Check Engine Light
Common causes
- ECM B power failure
- CAN bus wiring
- ECM B failure
- Fuse blown
- Connector issue
Diagnostic steps
- Check ECM B fuse
- Test power and ground
- Check CAN wiring
- Try direct communication with ECM B
- Compare ECM A and B communication status
Repair notes
Dual ECM vehicles are less common. Check power supply to secondary ECM.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High