Back to 1998 BMW 528i
Help
1998 BMW 528I
2.8L I6 M52•RWD•AUTOMATIC•gas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor499Torque3173Fluid8DTC1210Battery1Maintenance0Recalls0
P1347high severityPowertrain

Misfire Cylinder 3 With Fuel Cut-Off

on 1998 BMW 528i 2.8L I6 M52 · RWD

What this code means

The DME detected a severe misfire on Cylinder 3 that triggered protective fuel injector shut-off. Continued driving with this condition may cause catalytic converter damage.

Symptoms

  • Check Engine Light flashing
  • Rough running
  • Loss of power
  • Exhaust odor

Common causes

  • Faulty ignition coil Cylinder 3
  • Worn spark plug Cylinder 3
  • Fuel injector failure Cylinder 3
  • Low compression
  • Valve train issue Cylinder 3

Diagnostic steps

  1. Read cylinder-specific misfire counters
  2. Swap ignition coil to isolate fault
  3. Inspect spark plug condition
  4. Test fuel injector
  5. Perform compression and leak-down test

Repair notes

Replace faulty ignition coil or spark plug on Cylinder 3.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 1998 BMW 528i repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the BMW 528i — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →