2A88moderate severityPowertrain
Exhaust VANOS Control Fault / Timing Over-Advanced, Bank 1
on 2000 BMW 528i 2.8L I6 M52 · RWD
What this code means
The exhaust VANOS system shows a control fault or over-advanced camshaft timing (OBD P0014). The ECU detects the exhaust camshaft timing performance is out of range.
Symptoms
- Rough idle
- Reduced power
- Check engine light
Common causes
- Sticking or faulty VANOS solenoid
- Dirty engine oil/clogged solenoid screen
- Low oil pressure
- Timing chain wear
Diagnostic steps
- Read VANOS actual vs target values
- Inspect and clean VANOS solenoid
- Check engine oil level and pressure
- Test VANOS unit operation
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1