P0552low severityPowertrain
Power Steering Pressure Sensor Circuit Low Input
on 2000 BMW 528i 2.8L I6 M52 · RWD
What this code means
The PCM detected a low voltage signal from the power steering pressure sensor. This sensor helps adjust idle when the steering system loads the engine.
Symptoms
- Rough idle when turning
- Check engine light on
- Possible stalling
Common causes
- Short to ground in sensor wiring
- Faulty power steering pressure sensor
- Corroded connector
- Failed PCM input circuit
Diagnostic steps
- Read sensor voltage with scan tool
- Inspect wiring for shorts to ground
- Check connector for corrosion
- Test sensor with known good reference
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1